Pro40™ True-RMS Digital Multimeter

The Pro40™ Digital Multimeter Irrigation tester is a premium tool for maintaining electrical systems whether low-voltage irrigation and lighting, or main AC power wiring. Fully industry specified and safety rated the Pro40™ has internal fuses for easy maintenance if it is mis-connected. Not only does it make most any electrical measurement you might need, but it has a “sniffer” non-contact voltage (NCV) detector built in. An LED flashlight rounds out the practical features of the Pro40™.

  • Auto-ranging Volt-Ohms-Amps Meter.
  • True-RMS Accuracy.
  • Measures up to 600 volts, 10 amperes and 60 Megohms.
  • Rugged Protective Jacket.
  • Large backlighted LCD Display
  • LED Flashlight.
  • Detachable Premium Cord Set for Field Flexibility
  • Full IEC 61010 and CE Safety Tested to Cat III 600 Volts.
  • Bonus Measurement of Capacitance, Frequency, Duty Cycle and Diode Function.
  • Uses two (2) AAA Batteries (not included).

Pro12™ Wide-range Non-contact Voltage (NCV) Detector

The Pro12™ Non-contact Voltage Sensor (NCV) gives users a safe, fast way to check for power in electrical systems whether low-voltage irrigation and lighting, or main AC power wiring. Fully industry specified and safety rated the Pro12™ uses both visual and audible indicators for certainty. A headlight rounds out the practical safety features of the Pro12™.

  • Check Outlets and Insulated Cables for Power Voltage Before Handling or Using Them.
  • Fully insulated for safety. IEC 61010 rated and CE compliant.
  • Two range settings allow the detection of low and high voltages like 12 volts AC and 120 volts AC in a single unit.
  • Audible and visual indicators.
  • Backlighted LCD Display and Headlight.
  • Uses two (2) AAA Batteries (not included).

Pro48K™ Multi-Function Irrigation System Test Kit

The Complete Irrigation System Test Kit for Contractors

Now with DC Latching Capability

The Pro48K™ Multi-Function Irrigation System Test Kit is a complete portable, battery-operated irrigation system diagnostic kit priced for ownership. This kit consists of a Pro48™ Solenoid Activator, the Pro210F™ Tone Probe and a Pro21™ soft carrying case.

A Powerful Workhorse Testing Kit For Any Contractor

Pro210F™ Tone Probe & Pro48™ Solenoid Activator – Together with the Pro210F™ Tone Probe, the Pro48 can transmit a tracing tone and identify wires using traditional tone/probe methods. Operation is simple, as LEDs indicate tests and conditions.

Pro21™ Carrying Case – Both the Pro48™ and the Pro210F™ units can be kept in this durable soft zippered carrying case.

Check out the Pro48™ Solenoid Activator, or find an Armada distributor to purchase the Pro48K™ kit.

Pro48™ Multi-Function Irrigation System Tester

Now with DC Latching Solenoid Capability

A powerful tool any technician can afford.

Irrigation problems are often problems with the electrical portion of the sprinkler system.  Sprinkler systems work on the idea that 110 volt AC is converted to 24-volt dc and sent down the wires leading to a solenoid attached to a valve at the appropriate time.  If any of these electrical components fail, the system fails.  The Pro48™ tests all of the critical electrical components and does so in an easy to follow LED system that walks a user through the process component by component.  This system of checks tests out the clock or controller first, then the wires, and finally the solenoid, which are all of the electric components of a sprinkler system.  So with a Pro48™ tester, a user quickly determines which of these 3 parts is at fault.

The Pro48™ Multi-Function Irrigation System Tester is a value-priced tester for irrigation contractors and maintenance personnel. This is important because no technology works if you can’t afford it.

Why Rely on the Pro48™ Multi-Function Irrigation System Tester?

Sprinkler solenoids can be checked using either activation or chatter modes. Lost or buried solenoids are quickly found as well by listening for the chatter or “chatterbox” function. Wiring can be verified and tagged with the built-in tone generator function. Clocks also are tested for proper 24vac output with a simple LED power check.

Made from a heavy-duty plastic case, the highly visible yellow Pro48™ sprinkler solenoid activator is designed for rugged use in the field.

The Pro48™ Multi-Function Irrigation System Tester:

  • Activates and holds solenoids open (including DC latching).
  • Generates and traces 1Khz tracing tone
  • Checks clock 24v power output
  • Tests for open or shorted wiring
  • Uses 2 9v batteries (not included)

Learn more about using Armada’s Pro48™ Multi-Function Irrigation System Tester by browsing our online video resource library, or check out our Pro48K Solenoid Activator/Chatterbox Kit.

Pro220K™ Advanced AC Filtered Tone and Probe Kit

LED Headlight, AA Battery Power, AC Noise Rejection Filter

Cutting edge technology including;

  • LED Probe Headlight for Dark Areas.
  • AC Noise Rejection Filter to Greatly Reduce Buzzing and Humming from Electrical Sources.
  • Metal/Plastic Combination Tip to Give Maximum Response but Still Protect Sensitive Hardware.
  • AA Battery Power Lasts for 250+ Hours of Operation.

The Pro220K™ Advanced AC Filtered Tone and Probe kit is designed to help contractors easily identify the termination point of any wire. The Pro220K™ Advanced Tone and Probe Kit pinpoints where a particular wire or cable terminates at the far end of the cable.

How Does the Pro220K™ Advanced AC Filtered Tone and Probe Kit Work?

  • The tone generator Model Pro110™ is connected to a wire at one end using the attached alligator clips or RJ11 plug and activated.
  • The tone probe Model Pro210F™ Advanced Filter Tone Probe is then taken to the other end of the wire, activated and used to locate the beep-beep-beep signal of the Pro110™.
  • The wire making the loudest signal is the one connected to the tone generator, and therefore that particular wire’s termination point is identified.

Pro90™ Automatic Clamp Multimeter

With the Pro90™ Automatic Clamp Meter, Simplicity Starts Here

The Pro90™ Automatic Clamp Multimeter is simple to use with easy-to-read controls, perfect for experts and novices alike. With the Pro90™, simplicity starts with a single button: the on/off switch. It is the only switch on the Pro90™ and the only switch that you need.  After one push of the button to turn it on, the Pro90™ takes care of itself.  The Pro90™ automatically measures voltage, resistance, and amperage, as well as turns itself off when it’s not in use.  It even automatically backlights when you’re working in the dark, the screen automatically lights. Troubleshooting has never been so easy.

How Does This Automatic Clamp Multimeter Work?

Just connect the Pro90™ test leads to the circuit to be tested, and it will automatically:

  • Test for voltage from 1.3 to 600 volts AC or to 1,000 volts DC. If it senses voltage, the Pro90™ multimeter measures it, including automatically setting the correct range and determining if the voltage is AC or DC.
  • If the Pro90™ doesn’t detect any voltages, it automatically switches to resistance or ohm measurement, again auto-ranging, up to 10k ohms.
  • A continuity buzzer sounds at less than 25 ohms.
  • The clamp is also used for measuring AC currents from .6 to 400 amps. Just clamp on to one leg of your electrical circuit and it will do the rest.

The Pro90™ comes complete with a carrying case, red and black probe leads, and a 9-volt alkaline battery.

With the Pro90™, identifying the type and severity of electrical problems is quick and easy.

Order your Pro90™ today.

Pro30™ General Purpose Digital Multimeter

Our Easy to Use Digital Multimeter

If you’re searching for a general-purpose multimeter for identifying wiring faults, look no further than Armada’s Pro30™ Digital Multimeter.  Test capability includes resistance, amperage, and either AC or DC voltage.  The Pro30™ comes with a troubleshooting cheat sheet for irrigation included in the package.

On-the-Go Simplicity

Multimeters are extremely handy when it comes to determining whether the electrical characteristics of a circuit are in a parameter.

For example, by setting the Pro30™ to VAC, then inserting it into a wall outlet, you can quickly determine the actual voltage available (or even if there is no voltage at all) at that outlet.

Quality You Can Count On

We know there are a lot of inexpensive multimeters out there, but the Pro30™ offers the best value for several reasons, including the fact that the leads (or red and black cords) wrap around the body of the tester and snap into place when they’re not in use. This keeps them organized and out of the way. The Pro30™ also comes with a protective case and an A23 battery.

Specifications:

  • DCV: 0-500V
  • ACV: 0-500V
  • DCA: 0-200mA
  • Resistance: 0-2Mohm
  • Audible continuity: <50ohmDiode test
  • Battery: A23 (included)

Pro700™ Underground Wire and Sprinkler Valve Locator

Professional Sprinkler Wire and Valve Locator for Commercial Contractors

(And a whole lot more.)

The Pro700™ Underground Sprinkler Wire and Valve Locator is a tried and true solution for irrigation contractors and maintenance personnel. The Pro700™ has been in production since 2008 and was the first wire and valve locator to use external speakers, D batteries, and a longer wand than the old tiny PVC pipe and tackle box.  Incorporating a powerful transmitter and sensitive receiver, the Pro700™ tracks irrigation wires, finds missing valves and detects damage or cuts to vulnerable underground cabling.  The Pro700™ has a proven track record of 10 years of finding these problems.

The Pro700™ model builds on the success of the original Pro600™ wire and valve locator model. Our Pro700™ includes an extra-long metal wand for easy tracking, the option of using an external speaker instead of a headset when listening for a signal and D batteries for power.

We have also included the following features:

  • A 27-inch receiving wand
  • D battery transmitter power
  • Analog meters for easy viewing of power levels on the transmitter and receiver
  • Stereo KOSS headset.  Easy to replace stereo vs hard to find mono headsets

Wire and Valve Location Simplified

The Pro700™ model simplifies wire and valve location by transmitting an easy-to-follow beeping signal tracked by the extended receiver. Simply connect the transmitter to ground and to the underground wire to be tracked, and then turn it on. Follow the beeps with the receiver using the visual meter, external speaker or a headset. It’s really that simple!  If you don’t believe us, check out our YouTube channel ArmadaTech, chocked full of over 30 How to videos that explain various testing issues, including how easy a Pro700™ is to operate.

Pro800D™ Hi-Power Wire and Valve Locator

Analog, Multi-feature Workhorse

The Pro800D™ Underground Wire and Valve Locator for sprinkler and irrigation professionals sets a new standard for features and functionality.  Introduced in 2010, thousands of Pro800D™ wire and valve locators around the country testify to its utility and effectiveness.

Precision Technology at its Finest

Incorporating all of the features of the standard Pro700™, the technologically advanced Pro800D™ offers several features you simply can’t find in other similarly priced wire and sprinkler valve locators:

  • 20% more transmitter power
  • Wireless broadcast mode for simple cable connection
  • Null or peak tracking receiver/wand
  • Stereo Headset included

Underground Wire and Valve Location Beyond Expectations

But don’t just take it from us.

With the Pro800D™, Armada Technologies has revolutionized the way we track and trace underground sprinkler wires and lost solenoids. With a combination of high performance and affordability, the Pro800D™ along with its predecessor, the Pro800™, has dominated the irrigation blogs, message boards, and distributor counters because it can do what no other wire and valve locator can do!

Specifications:

  • Power output – 950v P-P
  • Transmitter battery – 8 D Cell Alkaline
  • Receiver battery – 1 9v square (included)
  • Distance – up to 4,000 feet
  • Depth – up to 8 feet
  • Weight – 8 pounds (entire contents)
  • Warranty – 12 months from date of purchase

Watch the training video below to learn more about the Pro800D™, or contact us with questions about our wire and valve locators.

Pro65™ Plastic Pipe Wire/Valve Locating Accessory

65 Foot Tracing Snake with Integral Sonde

World’s Smallest Pipe Snake

The Armada Technologies model Pro65™ Plastic Pipe Tracing Accessory (or snake) is a simple yet effective tool for tracing an underground pipe or conduit that does not have an accompanying trace wire. The Pro65™ is the world’s smallest tracer, able to navigate 90-degree bend radius’ of just under 2 inches. This means that some of the smallest PVC or plastic pipes can now be traced without digging or cutting the pipe. In the sprinkler world, simply remove the sprinkler head, insert the Pro65™ into the pipe, and apply pressure to move it along the path. 1 1/4 inch pipe is no problem. At the end of the Pro65™ is a sonde, which acts as a beacon and sound spot when used with a 33KhZ transmitting locator. The Pro65™ works with any locator to track path but the sonde tip requires 33KhZ for the extra sound boost.